Author Topic: Total seal Quickseat (Read 3253 times)

subsonic · « **on:** March 10, 2008, 12:42:33 pm »

Thinking about buying some. Whats the best price you have found for it, and where did you get it?

dillenger1 · « **Reply #1 on:** March 10, 2008, 03:21:22 pm »

Is it true that you can "use baking soda in a pinch"?Ive heard of cleaning"comet" type powders also.What is the real stuff,chemically?

jtanguay · « **Reply #2 on:** March 10, 2008, 03:39:14 pm »

i got some right from total seal. it's not expensive for what it 'can' do. (quickly seating rings is not a bad thing... :wink: )

i think it was around $10-20 bucks??? call and find out

the caveman · « **Reply #3 on:** March 10, 2008, 03:56:13 pm »

As far as i understand it, the powder is just there to tell you when the walls are 100% oil free. In theory if you are methodical about cleaning and drying them you should be good to go . Remember the idea is to run the rings in dry. Maybe that's why comet would work, as it would change color if there was any moisture.

jimfoo · « **Reply #4 on:** March 10, 2008, 05:46:07 pm »

I would not put comet in an engine. Chlorine does bad things to all metals and oil as well.

Vanagoner · « **Reply #5 on:** March 10, 2008, 07:05:47 pm »

"Bar Keeper's Friend" cleanser might work better- no chlorine. The Oxalic acid removes rust (H2 C2 O4-2H2O) and wouldn't hurt aluminum, like caustics I think.

the caveman · « **Reply #6 on:** March 10, 2008, 08:18:58 pm »

yeah certainly wasn't an endorsement. just get it dry.

jtanguay · « **Reply #7 on:** March 11, 2008, 01:10:22 am »

if you want to get it dry use some of that orange cleaner crap. the best degreaser i've ever seen that is practically harmless. (unless swallowed of course :roll: )

subsonic · « **Reply #8 on:** March 11, 2008, 12:29:21 pm »

So are you guys saying that this stuff just shows moisture on the cyl walls?