Author Topic: Bunch of parts for sale! Turbo's, IP's, heads, and others! (Read 9082 times)

jtanguay · « **on:** February 29, 2008, 12:07:53 pm »

Advertising for a friend. he has collected quite a little cache of parts over the years...

1.6TD heads - some used and should be okay to use as-is and another one ready as a good core for rebuild not sure of the price... i think he has non turbo head(s) too. i think one solid lifter 1.6TD head as well. $175 to $200 depending on condition

1.6TD intakes & manifolds... not sure how many there are but i saw at least 2 of each. maybe $40 for intakes and manifolds?

1.6TD injection pumps. there is quite a few... some are okay and some leak but they could use new seals. $175

1.6 N/A pump that leaks.. 75$?

1.9TD pumps both with the adjustment on the pulley. sold as cores.. one *might* work as is, but no guarantee's. 200$ each?

Turbo's! A few 1.6 K24's and i think some T3's? he also has a turbo from an '82 audi 5 cyl diesel with about 80'000km on it. very good turbo. around $150 for turbo's depending on condition.

instrument clusters - gas & diesel with tachs... make an offer? one diesel cluster has the arm broken from the tach... will sell for less.

***specify whether you're looking for a core or something good.

***also if you're looking for little odds and ends, he probably has them! for example the coolant flange at the front of the head. he has a few of the aluminum ones for those who do not like the plastic kind. he also has a bunch of bracketry...

also has an '87 nissan sentra diesel engine. good running with around 200'000km's. complete with harness & should have everything for a swap. couple hundred bucks for it. (can't sell it

)

most of this stuff is OBO as i'm not too sure the value but will use what others are selling for as a basis for price.

maybe i'll go to his place with my digi camera one of these days to take some pics.

boostin · « **Reply #1 on:** February 29, 2008, 12:44:56 pm »

looking for 1.6TD manifolds. is the $40 for each or a pair (cdn/us), and what would the freight be for one of each, intake and exhaust manifold, to US 72315.

thanks, Ken

jtanguay · « **Reply #2 on:** February 29, 2008, 12:54:01 pm »

Quote from: "boostin"

looking for 1.6TD manifolds. is the $40 for each or a pair (cdn/us), and what would the freight be for one of each, intake and exhaust manifold, to US 72315.

thanks, Ken

i think the going rate for them separately is $40 but maybe $80 for both shipped? i'll get some pics for you too.

boostin · « **Reply #3 on:** February 29, 2008, 01:01:45 pm »

Quote

maybe $80 for both shipped?

pics would be great..
let me know... I have paypal....
BUMP: I will take a set when you are ready.....Thanks

Ken

fastvicar · « **Reply #4 on:** February 29, 2008, 03:42:03 pm »

I would take TD intake & manifold set if available as well. Can he do a combo price w/ turbo? (My brother is itching to turbo his Rabbit)

quietmission · « **Reply #5 on:** February 29, 2008, 05:08:24 pm »

I would take a t3 exhaust manifold if you have any.

jtanguay · « **Reply #6 on:** February 29, 2008, 06:24:59 pm »

Quote from: "fastvicar"

I would take TD intake & manifold set if available as well. Can he do a combo price w/ turbo? (My brother is itching to turbo his Rabbit)

possibly even with the turbo head to match... i'll ask!

jtanguay · « **Reply #7 on:** February 29, 2008, 06:26:38 pm »

Quote from: "quietmission"

I would take a t3 exhaust manifold if you have any.

now if i'm not mistaken, K24 manifolds & T3 manifolds are the same? trapezoidal flange? if they aren't then i'll have to check...

quietmission · « **Reply #8 on:** February 29, 2008, 07:06:16 pm »

I don't know much about that. I have the turbo but no manifold and oil line.

rallydiesel · « **Reply #9 on:** February 29, 2008, 07:28:50 pm »

Is that the coolant flange with the two sensors on it? If so I would be interested. Does he have a Mk2 alternator?

jtanguay · « **Reply #10 on:** February 29, 2008, 07:35:03 pm »

Quote from: "quietmission"

I don't know much about that. I have the turbo but no manifold and oil line.

i can probably get the oil line for the turbo... just need to look through the piles

jtanguay · « **Reply #11 on:** February 29, 2008, 07:35:45 pm »

Quote from: "rallydiesel"

Is that the coolant flange with the two sensors on it? If so I would be interested. Does he have a Mk2 alternator?

he has some flanges for gassers and some for diesels. i'll get some pics! not sure about the mk2 alt. i'll ask!

jtanguay · « **Reply #12 on:** March 01, 2008, 04:59:42 pm »

bump he might have everything needed to convert from a/c to non a/c... i'll ask him that too.

tSoG-84bit · « **Reply #13 on:** March 01, 2008, 06:45:05 pm »

I'm looking for a mk2 Non AC setup; alt, brackets and tensioner. Also, a 1.6 td pump core. Actually, ask him what he would want for all of it as well.

jtanguay · « **Reply #14 on:** March 01, 2008, 07:56:02 pm »

Quote from: "tSoG-84bit"

I'm looking for a mk2 Non AC setup; alt, brackets and tensioner. Also, a 1.6 td pump core. Actually, ask him what he would want for all of it as well.

I think $150 for a core pump sounds good? pump will be leaking but should otherwise work.

I'm going to see him on Monday so I'll gather a list of what to look for. On the phone he said he has about 4 turbo exhaust mani's and 4 turbo intake mani's. pics to come!