Author Topic: 1.6 td & na parts for sale (shipping is not included) (Read 5421 times)

fuslit · « **on:** February 18, 2008, 09:07:46 am »

Turbo diesel stuff:
Intake/exhaust manifold: sold to blkboostedtruck

M2 gauge cluster with tach, plastic on the front is broken, but it shouldn't be to hard to find another cluster. or just swap the tach over to your current cluster like you were going to anyway

- $80

w-terminal alts unknown condition, one looks like it got chewed on by a beaver but has a pulley on it, the other doesn't. Both spin freely and don't appear to be 'bad' I have no way to test. - $30 bucks apiece

mk2 (at least that's what I was told) turbo diesel airbox and various attached bits. Bottom of the airbox has piece broken on it but it shouldn't affect how it works - $50

1.6 td pistons with valve slap when the timing belt broke (sides are in good shape, no scratches from my brief glance over.) - ? I think there's still some use left in them, make an offer

NA diesel stuff:
1.6 na diesel exhaust manifold dual exit non-toilet bowl. One bold broken on the lower part. - $20

Air box sans snorkel one 'tie down clip holder' broken - $10

Air box with snorkel no tie-down clips - $20

I've got some other turbo diesel related things which I will be getting together pics of and adding to this post. (heads and various other parts) as I say shipping isn't included, i've got to pickup a scale so I can calculate it. If your interested in anything pm me and let me know.

more pics of things in question here
http://fuslit.org/photo_gallery/index.php?album=misc/car/for_sale/02-17-08_diesel_parts/

-Todd

shegel · « **Reply #1 on:** February 18, 2008, 10:21:08 am »

i dont know which you have over there but any shucks checkers or kragen can test those alts for free. you dont even need to have em in a car.

blkboostedtruck · « **Reply #2 on:** February 18, 2008, 02:47:17 pm »

dibs on the intake and exaust!
wanna give mea shipping quote to greenfield wisconsin 53221?
thanks Duane

AdAm84 · « **Reply #3 on:** February 18, 2008, 04:00:39 pm »

Seconds on intake and exhaust. If it doesn't sell send me a message. Thanks.

fuslit · « **Reply #4 on:** February 19, 2008, 05:52:36 am »

Shegel: hmm, I've not seen anything like that around here, but I'll check at autozone / parts america to see if they have something, I vaguely remember seeing something there on their bench which looked like it might be able to test alts.

Duane, I'll pick up a scale and get you a quote later today.

AdAm84, if he declines I'll let you know. I might have another intake/exhaust as well I've got to check in my pile.

-Todd

blkboostedtruck · « **Reply #5 on:** February 19, 2008, 02:19:11 pm »

yep let me know? no rush the motor it's going on isn't here yet anyways!
also if will fit in a u.s.p.s. box at the post office it can be sent at a certain price nomatter what the weight is! priority mail! always get a tracking # when shipping with them!
you didn't sell your truck did you?
how come your selling all your goodies?
thanks Duane

fuslit · « **Reply #6 on:** February 19, 2008, 07:06:33 pm »

Quote from: "blkboostedtruck"

yep let me know? no rush the motor it's going on isn't here yet anyways!
also if will fit in a u.s.p.s. box at the post office it can be sent at a certain price nomatter what the weight is! priority mail! always get a tracking # when shipping with them!
you didn't sell your truck did you?
how come your selling all your goodies?
thanks Duane

shipping quote sent Duane, In terms of me selling off my goodies, at this point I think it's safe to say that I'm not selling anything I don't have a second (and sometimes third of...) or I'm moving in a different direction than originally thought I'd go.

I've got a rebuilt td engine which I will be putting into a passat wagon I'm planning on trading my caddy for. So yes, I'll be getting rid of the caddy but at the moment, it's still in the garage. The goal is to (attempt) get down to two cars and free up space. A daily driver (the wagon) and a project car. (in this case, at the moment, Joe's old GTD) I am interested in freeing up space as well for another hobby I want to into, metal work. So Metal lathe, milling machine, green sand casting, etc. But that's side tracking my FS thread

-Todd

myke_w · « **Reply #7 on:** February 23, 2008, 02:53:44 pm »

looking for a no ac water pump pulley..

wikdslo · « **Reply #8 on:** February 23, 2008, 03:31:23 pm »

Quote from: "myke_w"

looking for a no ac water pump pulley..

If this man doesn't have one, I believe I do.
check the thread below this one. Make an offer on it.

fuslit · « **Reply #9 on:** February 23, 2008, 06:39:26 pm »

Quote from: "myke_w"

looking for a no ac water pump pulley..

I have some pulleys, but not sure what I have off the top of my head. Let me check and let you know.

-Todd

fuslit · « **Reply #10 on:** February 28, 2008, 06:45:37 pm »

Quote from: "wikdslo"

Quote from: "myke_w"
looking for a no ac water pump pulley..

If this man doesn't have one, I believe I do.
check the thread below this one. Make an offer on it.

No luck finding one in my pile, but that's not to say it won't turn up. Feel free to contact him and get him his part.

Been a crazy past couple weeks, so no part update yet.

-Todd