Author Topic: parting out 2 engines... 1.6TD & 1.9AAZ (Read 10715 times)

addautomotive · « **Reply #15 on:** March 05, 2008, 12:01:05 pm »

Quote from: "starrd"

I have sent e-mail and IM's but no reply, so I'll try here??
Looking for
1.9 AAZ intake manifold
1.9 AAZ vacuum pump
also1.9 AAZ breather pipe from side of block to valve cover (2 pieces)

Do you have any of these?

Sorry, I was away for work again, and then in the garage working on my car.

-I think the intake manifold is sold, you have second dibs though, if you want it.
-The 1.9 vacuum pump I have is junk, sorry
-I will check for that breather pipe tonight. I have the part that bolts to the block... not sure about the hose that clips into it.

I also replied to PMs from Turbinepowered and Darkness is Spreading

Baselyne · « **Reply #16 on:** March 05, 2008, 12:51:48 pm »

is that turbo k 24 gone?

addautomotive · « **Reply #17 on:** April 02, 2008, 10:08:41 pm »

Howdy folks!

Just got back from vacation in Mexico, I think I have all my emails & PMs looked after.

I still have a fair bit of stuff left:
-k24
-1.6td head
-1.6td injectors
-1.6td pistons (fair)

Anyway, have a look for photos:
http://www.jakepalmeristheman.com/2005/10/new-batch-of-dieselicious-goodness-two.html

I also just bout a '94 Golf w/ 1.9td AAZ. I should have the engine apart within a couple weeks

diesel smoke · « **Reply #18 on:** April 02, 2008, 11:36:44 pm »

Still got the 1.6TD IP? How much?

Patrick · « **Reply #19 on:** April 03, 2008, 06:37:20 am »

Still have the clutch? Does it come with the flywheel for that price? I'm reading about one or two pins to locate the flywheel on the pressure plate and don't know which one I've got.

addautomotive · « **Reply #20 on:** April 03, 2008, 07:41:20 am »

Quote from: "diesel smoke"

Still got the 1.6TD IP? How much?

No sorry, it's sold.

Quote from: "Patrick"

Still have the clutch? Does it come with the flywheel for that price? I'm reading about one or two pins to locate the flywheel on the pressure plate and don't know which one I've got.

Yep $80 includes the flywheel

Ziptar · « **Reply #21 on:** April 04, 2008, 06:03:17 am »

YGPM on the injectors.

Goat · « **Reply #22 on:** April 05, 2008, 03:02:02 am »

Do you have a 1.9 alternator bracket or crank pulley?

Patrick · « **Reply #23 on:** April 05, 2008, 08:31:28 pm »

Patrick wrote:
Still have the clutch? Does it come with the flywheel for that price? I'm reading about one or two pins to locate the flywheel on the pressure plate and don't know which one I've got.

Yep $80 includes the flywheel

What would it cost to mail it to southwestern ontario? I could send a chack or money order, not set up for paypal and I don't want to be!

ehennebury · « **Reply #24 on:** April 06, 2008, 03:30:41 pm »

e-mail sent re: 1.6 td pistons.
-Eric

addautomotive · « **Reply #25 on:** April 29, 2008, 08:50:02 am »

I still have a few items left:

http://www.jakepalmeristheman.com/2005/10/new-batch-of-dieselicious-goodness-two.html

I'm also looking for a good k03 if anyone has one they'd like to trade!

k5ryannc · « **Reply #26 on:** May 03, 2008, 05:23:43 pm »

i sent you an email in your yahoo account
i hope you'll get back to me i cant find a good td crank for anything here in the states

thanks ryan

theman53 · « **Reply #27 on:** May 04, 2008, 05:23:29 pm »

I sent you an email. If you don't get anything from a Lucas in your inbox then, please let me know on here

addautomotive · « **Reply #28 on:** May 05, 2008, 01:39:40 pm »

theman53 & k5ryannc, you both have mail.

Jake

burn_your_money · « **Reply #29 on:** May 05, 2008, 09:30:04 pm »

Hey Jake,

I forget who the injectors are for but they arrived at the shop today

Tyler

Author Topic: parting out 2 engines... 1.6TD & 1.9AAZ (Read 10715 times)

addautomotive

Baselyne

addautomotive

addautomotive

addautomotive

addautomotive