S-PAutomotive.com

Author Topic: Pimping the glow plugs  (Read 27264 times)

Reply #30October 03, 2008, 02:54:21 pm

rabbitman

  • Veteran

  • Offline
  • ***

  • 2787
Pimping the glow plugs
« Reply #30 on: October 03, 2008, 02:54:21 pm »
Yeah I used a starter solenoid w/ 2 small terminals, I tried using the solenoid housing as the ground but it was made to use the 2 terminals. I just remembered a while ago I had the engine/body ground come loose and that made the GP light flicker, the difference is the GP relay wasn't clicking so I don't thinks the GPs were actually lighting.
I'll check the new solenoid ground and make sure it's tight. I'll post some pics of the settup sometime.
'82 Rabbit, I put on a euro vnt-15, 2.25" DP, 2.5" exhaust, the result.....it whistled.

I removed the turbo, made a toilet bowl 2.5" DP, the result....it was deafening. Now it has a homemade muffler up front and a thrush in the rear, the result.....less loud.
Watch: AGENDA, GRINDING AMERICA DOWN

Reply #31October 05, 2008, 05:47:55 am

FoXBoXRaCiNG

  • Junior

  • Offline
  • **

  • 92
Pimping the glow plugs
« Reply #31 on: October 05, 2008, 05:47:55 am »
I've sourced a fuel pump relay out of a golf... Any good?
My cat has A.D.D :(

Reply #32October 06, 2008, 10:23:59 am

FoXBoXRaCiNG

  • Junior

  • Offline
  • **

  • 92
Pimping the glow plugs
« Reply #32 on: October 06, 2008, 10:23:59 am »
Never mind, solenoid is the way!
My cat has A.D.D :(