okay, so i just got the last part i "think" i need to do this... ive got turbo/manifold, intake manifold, downpipe, oil pan, oil feed and return lines, pyrometer, boost gauge, lots of vacuum lines, and an intercooler that i probably wont use...
now here are the questions:
1. Do I have everything i will need?
2. Where should i hook up the oil feed lines?
3. (im a n00b) How do i hook up a boost gauge?
4. The turbo I have is watercooled. Should i just run a hose from the heater core to the turbo and from the turbo to the head?
thanks much,
-Aaron
You shouldn't need any vacuum lines. For the boost gauge just hook it up to the nipple on the intake manifold. If you are using a TD pump just T into that line.
Do you have the intake system such as filter? what about the elbow between the turbo and the intake?
You shouldn't need any vacuum lines. For the boost gauge just hook it up to the nipple on the intake manifold. If you are using a TD pump just T into that line.
Do you have the intake system such as filter? what about the elbow between the turbo and the intake?
ill be using the N/A pump for now (im almost broke), but ill be buying a TD pump in the next few months... is there a way to hook the oil feed lines to the oil filter flange or something?? and the reason i have vacuum lines is for the boost controller that i might use...
There should be a flat spot on the top of your oil filter flange, you drill and tap there for the oil pressure line