hey guys heres whats up. I have a 89 diesel golf and my trans bearings are bad so this is causing my trans to leak alot of oil around the seals. i am eventually going to swap in another used tranny but dont have the money right now. is there any kind of temporary fix for this problem or am i screwed untill i get a new tran. my stepmom doesnt like my parking in her driveway because i always leave a puddle of oil behind
, not to mention the terrible smell of the oil splashing on my exsaust while im driving :x
ps: is there a more durable aftermaket seal i can buy?
You could try to take an old seal and the stub it rides on to a bearing shop. they may have a triple lip seal available, and/or a sleeve to put ove the worn spot that you probably have on the stub.
You need the old seal to get a good measurement on the OD of the seal, a measurement of the ID of the hole it goes in would be better, but you don't want to take the tranny in with you! :wink: The stub will let them measure for the ID of the seal.
Good luck!
Anyone know if he can chage the offending bearing (bushing?) without pulling everything apart?