If a person was planning on flipping their exhaust manifold to run a gasser intake mani then Im told a person would have to make custom oil lines...
Does anyone care to share what they have fab'd up in the way of using that gasser intake mani?
if ur going to do that why not get a better mani and a better turbo
i use a early 4-2 manifold flipped over w/an adapter block to mate to a t3 flange
i was able to rebend the oil feed line,but made up a custom -10 an line for the drain
i cut off the stock drain tube before the rubber,and welded on a -10 fitting to screw the line onto
put a -10 bulkhead in the pan in stock td location
works great