Author Topic: glow plug connectors  (Read 2751 times)

January 03, 2008, 04:37:12 pm

jimfoo

  • Veteran

  • Offline
  • ***

  • 2110
    • http://www.66rover.com
glow plug connectors
« on: January 03, 2008, 04:37:12 pm »
What type of connector goes on a TDI glow plug? My AAZ had nuts and a threaded post, but these are just a bare post. I would like just the connectors if possible instead of having to fork out for a harness. Any sources for these?
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily

Reply #1January 03, 2008, 04:59:47 pm

jackbombay

  • Veteran

  • Offline
  • ***

  • 599
Re: glow plug connectors
« Reply #1 on: January 03, 2008, 04:59:47 pm »
Quote from: "jimfoo"
What type of connector goes on a TDI glow plug? My AAZ had nuts and a threaded post, but these are just a bare post. I would like just the connectors if possible instead of having to fork out for a harness. Any sources for these?


   The connectors are part of the harness.

  That said, you can thread the bare post and make your own harness fairly easily. #8 tap 32 threads per inch IIRC.

Reply #2January 03, 2008, 05:01:07 pm

jimfoo

  • Veteran

  • Offline
  • ***

  • 2110
    • http://www.66rover.com
glow plug connectors
« Reply #2 on: January 03, 2008, 05:01:07 pm »
Thanks! I was wondering about that. Then I can use the harness I already have.
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily