Author Topic: 12mm head, came plate, 8V manifold, etc... (Read 5828 times)

Tintin · « **Reply #15 on:** October 07, 2007, 04:06:02 pm »

IDI bosch injector 175Bar 1 stage with lift sensor, It's from 1.9L Turbo IDI citroen, that work well without lift sensor, but It's perfect for a IDI electronic projet, 75$

I found a used bosch 11mm head in my disorder parts **** sold ****

VW 8valve manifold T3 flange, I bough and modified to clear intake bolt, but it not fit with my quattro tranny, not enough space for the turbo.
*****SOLD*****

mechanic/electronic citroen pump with 20mm axle and proper alignment for TDI/IDI VW 4 cyl engine, no need to connect the timing control valve, 0-volt on the sensor is the same thing that the standard VE pump, exept that it's a good base pump for IDI/TDI hybrid mechanic/electronic control.
150$

Combo pump + injector 200$

RabbitGTDguy · « **Reply #16 on:** October 07, 2007, 08:55:17 pm »

Martin, Sent you a PM on the 11mm pump head and possibly that pump base. Maybe the exhaust manifold as well as I need some of these items for the b3 mTDI build...

Joe

Tintin · « **Reply #17 on:** October 11, 2007, 05:27:30 pm »

blkboostedtruck · « **Reply #18 on:** October 31, 2007, 11:56:10 pm »

PM sent for 10mm and 12mm pump head and AAZ cam plate!
Duane