FS: Garrett GT2052 turbo

[Spulen81]

I have a brand new GT2052 for sale. I bought a pair of these and only need one. This would be a nice upgrade for a TDI or a TD. This is a brand new turbo from Garrett from a Perkins application. It has a standard T25 flange and a internal wastegate.
Specs

GT2052 COMPRESSOR TURBINE

Compressor:
Wh Dia Trim A/R
Ind Exd
37.6mm 52.2mm
Trim A/R
52 0.51

Turbine:
Wh Dia Trim A/R Type
47.0mm 72 0.50 Wastegated


$450 shipped in the lower 48


http://www.turbobygarrett.com/...1.htm

[TD_Bunny]

I am assuming this could replace a stock T3 off of a 1.6TD? If not what would be needed to make this turbo fit? thanks

[Spulen81]

It won't directly bolt up.  You have the trapezoid shaped flange on your T3.  The flange on this turbo is a standard t25 rectangular flange.  You would have to make an adapter to bolt it up to the stock manifold.  The downpipe flange is different also.

[Spulen81]

Dropped the price a little.  I have another one these with a non wastegated .60 AR hotside for sale also.