Author Topic: need pics of TD injection pump mounting/assembled engine pix (Read 2963 times)

frankentoy · « **on:** February 04, 2005, 10:52:15 pm »

need help getting my 1.6 TD back together after a full rebuild which has taken long enough so i have forgotten how most of the brakets go together. the manual ( bently ) doesnt help much as far as diagrams go. im new to vw so being familar with it doesnt help. i bought the motor out of the back of a truck. and had to drag it through mud about 100 ft on the hood of a beetle to get to my truck. even if i could remember what it looked like before i ripped it apart all i could remember was how much it didnt look like an engine but as muddy oil dipped turd.

frankentoy · « **Reply #1 on:** February 07, 2005, 11:26:56 am »

can someone please hook me up with some close ups of the sides, and front of their motor. im not having any luck finding clear pictures to help. thanks

josiah47 · « **Reply #2 on:** February 08, 2005, 12:14:58 pm »

Hello,
i am doing the same thing you are and i have these pictures for now,
click on my www link and thats the ones i have for now, i do have to IP on too put didn't take a picture of it on yet sorry.
Hope this helps alittle
Cya

frankentoy · « **Reply #3 on:** February 09, 2005, 12:52:34 pm »

thanks alot dude. that helps big time. when you get the pump on let me see. im sure youll get there before from the looks of it, but i will help you out if i can. thanks

josiah47 · « **Reply #4 on:** February 10, 2005, 09:18:02 am »

Hello i am going to work on it tonight if nothing else come up then i will take some more pics, one of the IP forsure, then the exhuast and intake both stages, and what ever else i do.
you know we have to stick together to keep these little beasts together, and its more fun to talk about them with other people and share advice.
Good Bye got now

frankentoy · « **Reply #5 on:** February 14, 2005, 07:44:24 pm »

thank you for posting more pics. it really helps to make sence of what goes were when you can see the progress. if you get a chance when you mount the pump take a few shots of that.

josiah47 · « **Reply #6 on:** February 15, 2005, 10:18:41 am »

Hello,
i might go there tonight, i will be working on the front of the engine so then i will do it,
question: how far are you on your rebuild?
Cya

frankentoy · « **Reply #7 on:** February 16, 2005, 04:20:25 pm »

ive got the block with rotating assembly done, and im working on putting the head back together now. turbo is all rebuilt, all brackets, and parts for the motor are powdercoated and ready to go back on the motor as soon as i can get a valve spring compressor that works. those keepers are tough to get back in. again thanks for your help i couldnt have got as far as i am without your pics.