Author Topic: wtb mk3 tdi oil filter flange (Read 4026 times)

the4ork · « **on:** August 13, 2007, 10:38:37 pm »

i need it for my 1.8t swap...

so i would think it needs to be off an engine with a k03 turbo? i need it to fit my k03s oil line

burn_your_money · « **Reply #1 on:** August 13, 2007, 11:15:09 pm »

Is it the same as the AAZ ones (which are different then the 1.6 ones)?

RabbitGTDguy · « **Reply #2 on:** August 13, 2007, 11:16:16 pm »

Edited... mis info on my part...see the difference below and as mentioned. Starting with MK3/b4 they did change.

Joe

burn_your_money · « **Reply #3 on:** August 13, 2007, 11:27:31 pm »

I beleive around 1993 VW changed the mounting points of the flange where it attatches to the block. I know that the 1.9 IDI and 1.6 ones are differant. I think the 1.9 ones are the same as the ABA style but I'm not too familiar with gassers

RabbitGTDguy · « **Reply #4 on:** August 13, 2007, 11:39:30 pm »

I withdrawl what I said...
http://www.germanautoparts.com/Volkswagen/Rabbit/Engine/147/1

thats a rabbit style flange gasket... basically shows the mounting points... same as the MK2 8v/16v

Here is an MK3 ABA one...
http://www.germanautoparts.com/Volkswagen/Jetta/Engine/147/12

Here is the B4/MK3 TDI one...
http://www.germanautoparts.com/Volkswagen/Passat/Engine/147/5
same as the ABA one...mounting wise.

Top mounting changes slightly...

Plentiful number of ABA flanges out there!

Sorry for the mis-info. Should have dug in a bit more!

Joe

burn_your_money · « **Reply #5 on:** August 13, 2007, 11:44:00 pm »

The pictures of the ABA/B4 are the same as the 1.9 IDI ones, which I have 2 of

the4ork · « **Reply #6 on:** August 15, 2007, 01:26:50 am »

anyone got any pictures of one? specifically a pic that shows how the oil line connects?

burn_your_money · « **Reply #7 on:** August 15, 2007, 10:33:45 am »

I"ll try and grab some if I go to the garage today